Shareware Overload Trio 2/Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO/dir34/tapelib3.zip/TAPELIB3.EXE/TL_3.DOC

Text File | 1994-08-17 | 19KB | 441 lines

TAPE LIBRARIAN Version 3.0 - Demonstration Edition
(Limited to cataloging all the volumes on one (1) tape.)

The Tape Librarian software is copyright (C) 1994 by It's Magic! PC
Potions. Manual copyright (C) 1994 by It's Magic! PC Potions. All
rights reserved. IBM and AT are registered trademarks, and PC and
PC/XT are trademarks of International Business Machines Corporation.
Jumbo 120 and Jumbo 250 are trademarks of Colorado Memory Systems,
Inc. TAPE.EXE and its associated support files are copyrighted, 1987-
94 (All Rights Reserved.) by Colorado Memory Systems, Inc. The Tape
Librarian software, manual, or portions thereof may not be reproduced
in any form whatsoever (except as permitted within the License
Agreement) without the written permission of It's Magic! PC Potions.

@INTRODUCTION

Thank you for trying the Tape Librarian! The Tape Librarian system's
programs provides you with all the tools necessary for you to create
and maintain a catalog of the contents of your backup tapes. You will
be able to easily find and restore any file on any tape. No more
leafing through outdated handwritten logs or searching endlessly
through each tape's volume directories. With the Tape Librarian you
can master your backup tapes and create a true archival system which
is easily assessable through your computer.

@REQUIREMENTS

The Tape Librarian requires an IBM AT compatible (386 or 486
recommended) PC with a hard drive, DOS 3.0 or above, 640K of RAM, and
a CGA, EGA, or VGA monitor.  A mouse is optional.  Data files require
approximately 1K per 3 Megs of backup. Your data files may be larger
or smaller depending on the size and number of files backed up. The
Tape Librarian requires that you are using either a Colorado Memory
System's Jumbo or Trakker 120 or 250 tape drive, and that the backup
tapes were created with CMS's TAPE.EXE program (versions 2.54 through
4.05, are currently supported). CMS's TAPE.EXE program MUST reside in
the same directory as the Tape Librarian. PowerTape is supported for
TAPE.EXE version 4.05 only.

@FEATURES

The full Tape Librarian system, Version 3.0, provides you with the
following capabilities;
* Cataloguing a tape's volumes' contents (one, range, or all)
* Deleting a tape's volumes' contents from the catalogue files (one,
range, or all)
* Printing a listing of the contents of a catalogued tape's volumes
(one or all)
* Locating all occurrences of a path or file name on all catalogued
tapes
* Restoring a specific path or file from any volume, or range of
volumes, of any catalogued tape.
* Renaming a tape (if TAPE.EXE V4.0x is being used)
* Cataloging from a batch file.
As you can see the capabilities of the Tape Librarian are quite
extensive.

@INSTALLATION

Installation of the Tape Librarian is relatively easy.  The first step
is to identify the drive and directory in which CMS's TAPE.EXE program
resides. Probably C:\TAPE.  Attach to this directory. Place the Tape
Librarian disk in your A floppy drive. Type "Copy A:\*.*" at the DOS
prompt and press ENTER.  After the DOS prompt has returned type "TL"
to start the Tape Librarian system.

During the initialization of the Tape Librarian system, it checks for
existence of CMS's TAPE.EXE program. If TAPE.EXE is not found you will
receive a warning message. If you receive a warning message, please
ensure that the correct file is present and that it is located in the
same directory as the Tape Librarian system.

The program will also check for and validate the system's KEY and DATA
files. The first time you run the Tape Librarian system you will
receive a series of messages indicating that the KEY and DATA files
could not be found. Please follow the instructions to create the
files. If, in the future, you receive these messages again you should
quit out of the system and investigate the cause of the warnings.

When all Catalogue Files have been successfully validated you will be
presented with the Main Menu Screen. The Main Menu will display four
choices; Catalog, Search, Print, and Exit. Main Menu items may be
accessed by pressing the tab/arrow key until the desired choice is
highlighted, and pressing ENTER to select. Main Menu items may also be
selected by pressing the appropriate ALT+ letter keys or by clicking
on them with the left mouse button. PLEASE NOTE that throughout the
Tape Librarian pressing the RIGHT mouse key is the same as pressing
the ESC key and that all items may be selected by positioning the
cursor over them and pressing the LEFT mouse button.

@USING TAPE LIBRARIAN

@Menu Bar Options

@FILE
Selection of the File Menu Bar option will display a drop down menu
with the following choices:
@Support Info
Displays information on how to obtain technical support for the Tape
Librarian System.
@About
Displays information about the Tape Librarian System and It's Magic!
PC Potions.
@Exit Software
Exits the Tape Librarian System.

@VIEW
Selection of the View Menu Bar option will display a drop down menu
with the following choices:
@Tape IDs
Displays a scrollable listing of all Tape ID/Volume combinations
cataloged.
@A Print File
Allows for the displaying of a print file created with the Print
function.
@Last Search Files
Displays the most recent search results.

@UTILITIES
Selection of the Utilities Menu Bar option will display a drop down
menu with the following choices:
@Run TAPE.EXE
Executes the TAPE.EXE program in the current directory, then returns
you to the Tape Librarian.
@Run CONFIG.EXE
Executes the CONFIG.EXE program in the current directory, then returns
you to the tape Librarian.
@Shell to DOS
Shells out to DOS. Typing "EXIT" will return you to the Tape
Librarian.
@Set Max Finds
When searching for a path or file each successful match (called a
"FIND") is assigned a Find#. Due to memory and time limitations the
maximum number of finds allowed for a search is limited by the Tape
Librarian System. The default value is 300. This option allows you to
raise or lower the Find limit. Please be VERY careful when raising
this number. If set too high, rather nasty things may happen to your
memory and disk files! IT IS STRONGLY RECOMMENDED THAT ALL HARD DRIVES
BE BACKED UP BEFORE IMPLEMENTING THIS OPTION!!
@Set Data Path
By default the Tape Librarian's key, data, view, and print files
reside in the same directory as the Tape Librarian. This option allows
you to specify a different path for these files.

@Help
Displays the on-line documentation for the Tape Librarian.

@Main Menu Options

@Catalog
Choose this option to catalog a tape's contents by volume, a range of
volumes, or all volumes.
@Search
Choose this option to search the cataloged tapes' volumes for a path
or file. Once you have found the desired path or file, you may then,
optionally, continue and restore selected "Finds".
@Print
Choose this option to obtain a print-out of a cataloged tape's
contents.
@Exit Software
Exits the Tape Librarian System.

@Catalog Menu Options

@Tape ID
Select this option to enter the name of the tape to be catalogued. The
Tape ID is limited to 11 characters. Inbedded spaces are allowed as are
upper and lower case characters.
@Rename
This option is only available if you are using TAPE.EXE version 4.0x.
Select either "Yes" or "No".
@Volume(s)
Select this option to enter the volume, range of volumes, or "A" for
all volumes.
@GO!
This option will appear after valid entries are made for the above.
Selection of this entry will start the tape cataloging processes and
display the Additional Parameters and Catalog Tape - Status/Activity
window. If you enter a password parameter it must be valid for all
volumes being cataloged. Additional parameters are NOT edited. Before
cataloging a tape the Tape Librarian will check for previous entries
for the Tape ID/Volume(s) selected. If found you will be asked if you
want to delete the previous entries. Selecting "No" will abort the
cataloging process. The Status/Activity window will display the
processing as it occurs. When completed you will be asked if you want
to catalog another tape. Selecting "No" will return you to the Main
Menu, while selecting "Yes" will return you to the Catalog Menu.
@Exit to Main
Selection of this option will return you to the Main Menu.

@Search Type Options

@Path
Select this entry to enter a path to be searched for.
@File
Select this entry to enter a filename to be searched for.
@Exit to Main
Selection of this option will return you to the Main Menu.

@Path Entry Window
This window is displayed when the "Path" option is selected as the
Search Type. After a valid entry is made you will be asked if you want
to include sub-directories. Select "Yes" if you want the files in sub-
directories to be included in the file count.
@File Entry Window
This window is displayed when the "File" option is selected as the
Search Type. You may enter either a specific filename or a supported
wildcard. Only wildcard filenames using the "*" are supported. The
Restore process is not available after a wildcard search.
@Searching for...
This window is displayed after a valid path or filename has been
entered.
@Search Results (Finds)
This window is displayed after a successful search for either a path
or a specific filename. It's format will vary slightly depending on
the Search Type selected. Use this window to select the item(s) to be
restored.

@Restoring Files

@Restoring From A Path Search
The Search Results window displays the results from a successful path
search. The Finds are displayed in a scrollable section of the window.
For each Find the Find#, Tape ID, Volume#, Volume Date, Volume Time,
and the # (of) Files are displayed. The #Files tells you either how
many files are in the directory itself, or in the directory and it's
sub-directories, depending on whether or not the "Include Sub-
directories?" option was selected in the Path Entry window. You may
choose to restore either a single Find or a range of consecutive Finds
on the same tape. Along the button of the Search Results windows there
are five buttons; First (TAG)/(UNTAG), Last (TAG)/(UNTAG), View,
Restore, and Abort.
@First (TAG)/(UNTAG)
Use this button to tag or untag the first find to be restored.
@Last (TAG)/(UNTAG)
Use this button to tag or untag the last find to be restored.
@View
Selecting this button will cause the View File Display window to be
displayed.
@Restore
Selecting this button will start the restore processing and display
the Restore Options window.
@Abort
Selecting this button will return you to the Search Type selection
menu.

@Restore Options (Path Search)

@Drive
Enter the drive letter you want to restore to.
@Path
Enter the path you want to restore to.
@Include Files in Sub directories?
Selecting "Yes" will restore files in sub directories to the search
path. Selecting "No" will restore only the files in the search path.
@Command Conformation?
Selecting "No" will suppress the display of the Command Conformation
Window when a range of finds have been selected for restoration.
@Over-Write On?
Selecting "Yes" will allow any existing files to be over written
during the restoration process.
@Additional Parameters
Enter any additional parameters that may be required. See you TAPE.EXE
manual for additional information. This entry is NOT edited!
@Continue
Select this button to start the restoration process.
@Abort
Select this button to return to the Search Type window.

@Tape Request
The Tape request window sounds a tone and requests that you place the
correct tape into the tape drive. Choosing not to continue will return
you to the Search type window.

@Command Conformation Window
The Command Conformation window displays the details of the
restoration about to be performed. Please check it over carefully!
Consult your TAPE.EXE manual if you have any questions or doubts.
Selecting not to continue will return you to the Search Type window.

@Restoring From A File Search
The Search Results window displays the results from a successful file
search. The Finds are displayed in a scrollable section of the window.
For each Find the Find#, Tape ID, Volume#, Volume Date, Volume Time,
and the file's path/info are displayed. You may choose to restore only
a single Find. Along the button of the Search Results windows there are
three buttons; View, Select, and Abort.
@View
Selecting this button will cause the View File Display window to be
displayed.
@Select
Selecting this button will start the restore processing and display
the Restore Options window.
@Abort
Selecting this button will return you to the Search Type selection
menu.

@Restore Options (File Search)

@Drive
Enter the drive letter you want to restore to.
@Path
Enter the path you want to restore to. You may include a new file
name, as well. To clarify (I hope),  NOTE THE FOLLOWING
EXAMPLES CAREFULLY!!!

File Backed up as: \BPATH\FILENAME.EXT
Default path is DPATH
New Path Entry             Restored to:
(blank)                    \BPATH\FILENAME.EXT
\                          \BPATH\FILENAME.EXT
\NEWPATH\                  \NEWPATH\FILENAME.EXT
\NEWPATH\NEWFILE.EXT       \NEWPATH\NEWFILE.EXT
\NEWFILE.EXT               \NEWFILE.EXT
\NEWPATH\                  \NEWPATH\FILENAME.EXT
\NEWPATH                   \NEWPATH
NEWFILW.EXT                \DPATH\NEWFILE.EXT

The safest procedure is to enter a complete path & filename and after
restoration move the file to where you want it.

@Include Files in Sub directories?
When you perform a search on a file name, every occurrence of the file
name will result in a Find number on the Find Screen. Sometimes that
may result in several Finds that belong to the same volume on the same
tape, but in different sub directories. If this is the case the Tape
Librarian will tag these multiple occurrences on the Search Results
window as follows: the first occurrence will be marked with a down-
arrow, the last occurrence with an up-arrow, and any in-between with
an asterisks. Why? Because if TAPE.EXE is executed with the "/S" (sub-
directories) parameter, ALL occurrences of the file name, in all sub
directories, will be restored- even if you've specified only one Find
number. Your choice in the Include Files in Sub Directories? option
determines the setting of the "/S" parameter. If you choose YES, then
the restore command will be executed with the "/S" parameter, but if
you choose NO, only the Find number you specified will be restored.
The safest choice is to say NO. To sum up- selecting "Yes" will
restore all occurrences of the file in all sub directories in the tape
volume selected, while selecting "No" will restore only the file in
the selected path. (Clear as mud! Right?)
@Command Conformation?
Selecting "No" will suppress the display of the Command Conformation
Window when a range of finds have been selected for restoration.
@Over-Write On?
Selecting "Yes" will allow any existing files to be over written
during the restoration process.
@Additional Parameters
Enter any additional command parameters that may be required such as
passwords (/L), error log filename (/B), or 486 cache control (/Y).
See you TAPE.EXE manual for additional information. This entry is NOT
edited!
@Continue
Select this button to start the restoration process.
@Abort
Select this button to return to the Search Type window.

@Tape Request
The Tape request window sounds a tone and requests that you place the
correct tape into the tape drive. Choosing not to continue will return
you to the Search type window.

@Command Conformation Window
The Command Conformation window displays the details of the
restoration about to be performed. Please check it over carefully!
Consult your TAPE.EXE manual if you have any questions or doubts.
Selecting not to continue will return you to the Search Type window.

@Print Menu Options

@Tape ID
Select this option to enter a Tape ID. If the Tape ID entered is not
cataloged then you will be presented with an option to view the list
of the cataloged Tape IDs.
@Volume(s)
Select this option to enter either a tape volume or "A" for all
volumes.
@GO!
Select this option to begin the Print processing. This option will
only appear after a valid Tape ID and Volume have been entered.
@Exit to Main
Selection of this option will return you to the Main Menu.

@Print Options/ Status Window

@Print Filenames?
Selecting "No" will suppress the printing of filenames, only path
names will be printed.
@Print File?
Selecting "Yes" will print the print file created to the printer
attached to LPT1.
@Delete [filename]?
Selecting "Yes" will delete the print file. This option is only
available if you selected to print the print file.

@Cataloging a Tape from a Batch File

For those of you who backup at night or during off-hours from a batch
file, you can catalogue your tape automatically. The Tape Librarian
system contains a program file named TL_CTBAT.EXE which will catalog
your tape immediately.

Add the following lines to your backup batch file:

C:           (or the drive on which the Tape Librarian system resides)
CD\[Tape Librarian directory name- usually TAPE]
TL_CTBAT.EXE (parameter list)

Valid parameters are:

             /V=[A=All, U=Update, Volume #, or Volume Range X-Y]
                 (The "V", "A", and "U" must be uppercase. If omitted
                  all volumes will be cataloged. If used it must be the
                  first parameter.)
             /T="[Tape ID]"
                 (The "T" must be uppercase. Required.)
             /L="[password]"
                 (The "L" must be uppercase. Optional.)
             /Y or /-Y
                 (The "Y" must be uppercase. Optional.)

All parameters must be separated by a space and occur in the order listed
above.

Examples:

    To catalog all volumes on tape "test1"
         TL_CTBAT /T="test1"  or  TL_CTBAT /V=A /T="test1"
    To catalog new volumes on tape "test 2" and disable a 486's cache
         TL_CTBAT /V=U /T="test 2" /Y
    To catalog volumes 3 through 7 on "tape #4" which were backed up using
    a password of "temple"
         TL_CTBAT /V=3-7 /T="tape #4" /L="temple"


Please note that, on any error, the TL_CTBAT.EXE program will pause
until a key is pressed and that spaces are still allowed in the Tape
ID. The TL_CTBAT.EXE program must reside in the same directory as
CMS's TAPE.EXE program along with the Tape Librarian data and key
files. You can not rename a tape when cataloging in batch mode.